 |
March Pump Assy 1U-MD 115V 50/60HZ w/Plug Model# 0115-0007-0400
|
Max Flow
|
3 GPM
|
9 LPM
|
|
Max Head
|
4.6 FT
|
1 M
|
|
Power
|
.005 HP
|
.003 KW
|
|
Electrical
|
115V 50/60HZ or 230V 50/60HZ
|
|
Submersible
|
Submersible
|
|
|
60HZ
|
50HZ
|
|
Inlet
|
Screen
|
|
Outlet
|
1/4"MPT
|
|
Wet End
|
Polypropylene (Rear Housing), Buna N (O-Ring), Nylon
(Impeller), Cycolac (Cover), Carbon/Teflon (Thrust Washer), Delrin
(Screen), 316 Stainless Steel (Shaft), Ceramic Magnet
|
|
Uses
|
Submersible or Open Air
|
March Pump's industrial 1U-MD is an American submersible seal-less
centrifugal magnetic drive pump. It is capable of generating a maximum
flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.5
Feet (or around 2PSI). The 1U-MD pump must be used submerged. The
standard wet end (the materials that come into contact with the
solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon,
Stainless Steel, Cycolac, Delrin, and Ceramic Magnet. When submerged,
Epoxy, Noryl, Cycolac, Delrin, and the SJT Cord are also in contact with
the solution. The inlet connection is a screen, and the outlet is 0.25
inch male pipe thread. The standard motor is a 1 Phase 115V or 230V
0.005 Horsepower motor, which can be run on either 50 or 60 hertz (there
are performance differences between the hertz options). The maximum
internal pressure the pump can tolerate is 50PSI, and the maximum liquid
temperature is 190 Fahrenheit
or 160 Celsius in open air, or 87 Fahrenheit or 71 Celsius if submerged. The March 1U-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals.
|
|
|
