Products

Recent customers

  • "Cardinal Glass Industries"
    K. Vietin
  • "C.C.'s Pet Salon"
    N. Hampton
  • "Diamond Concrete Sawing"
    T. Cornwell
  • "National Air of Texas"
    C. Williams
  • "Integrity Electric"
    P. Bushilla
  • "Pineland Farms Potato Co."
    M. Whitney
  • "UPS Store"
    V. Lemme
  • "North Pressure Wash"
    J. Yos
  • "C. Insualtion Systems"
    T. Dennis
  • "Stang Decision Systems"
    K. Korpi
  • "Woods Nursing"
    T. Anderson
  • "Springhill Medical Center"
    R. Price
  • "Speedy Concrete Cutting"
    T. Barna
  • "Swan Pacific"
    J. Balistreri
  • "Elliot Electric"
    T. Cox
  • "Wickstrom Ford"
    P. Morgan
  • "Servpro"
    S. Yoran
Secured Checkout
You are here:Home > Flojet Pumps
Narrow Your Search:
1.0 - 2.3 GPM “Mini” Water System Pumps 3.3 - 4.5 GPM Flojet Water System Pumps
4.5 GPM “Base Mounted” Pump with Accumulator
Sort By:
Page of 4
200 SERIES PUMP 2HP 3PH
200 SERIES PUMP 2HP 3PH

  • Easy to service and maintain.
  • Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
  • Handles hard and soft solids without clogging.
  • Non pulsating flow
  • Uses standard IEC 71 motor, B3/B14 D100 frame
115V RUBBER IMPELLER PUMP
115V RUBBER IMPELLER PUMP Model# JA-12290-0001-7273

  • Easy to service and maintain.
  • Handles hard and soft solids without clogging.
  • Non pulsating flow.

Body Materials Phenolic Plastic
Impeller Neoprene
Seal Lip Type
Bearings Uses motor bearings
Shaft Material Stainless steel
Port Type 5/8" OD for Hose barbs
Voltage 115 (VAC)
Cycles 60 (Hz)
Motor 1/6hp 1750rpm
Weight 12 (lb) 5.4 (kg)

115V TRANFER PUMP
115V TRANFER PUMP JA-12510-0001

INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment.
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.
MARINE: Washdowns, utility dock side pump.
PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling.
BRONZE UTILITY PUMP
BRONZE UTILITY PUMP Model# JA-18610-0271

18610 Bronze Utility AC Motor Pump Unit

    • Easy to service and maintain.
    • Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
    • Handles hard and soft solids without clogging.
    • Non pulsating flow

    Body Materials Bronze
    Impeller Neoprene
    Seal Neoprene Lip Type
    Bearings Uses motor bearings
    Shaft Material 316 Stainless steel
    Port Type 1/2" (12.7 mm) NPT female;
    3/4" (19 mm) male garden hose adapter
    Voltage 115 (VAC)
    Cycles 60 (Hz)
    Motor 1/4hp
    Weight 12 (lb) 5.5 (kg)

    BRONZE PUMP PEDESTAL MT VTN 3/8
    BRONZE PUMP PEDESTAL MT VTN 3/8 Model# JA 2620-1024

    12290 Phenolic Plastic Flexible Impeller AC Motor Pump Unit

    • Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
    • Easy to service and maintain.
    • Inexpensive to buy and operate.
    • Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
    • Handles hard and soft solids without clogging.
    • Can pump in either direction.
    • Will not airlock.

    Body Materials Bronze
    Seal Nitrile Lip Type
    Bearings Sealed Ball Bearings
    Shaft Material Stainless steel
    Port Type 3/8" NPT(f) Internal
    Weight 2 3/4 (lb) 1.3 (kg)

    1" BRONZE PUMP 2/3 CAM
    1" BRONZE PUMP 2/3 CAM Model# JA 777-9051

    • Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
    • Easy to service and maintain.
    • Inexpensive to buy and operate.
    • Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
    • Handles hard and soft solids without clogging.
    • Can pump in either direction.
    • Will not airlock.

    Body Materials Bronze
    Impeller Neoprene
    Seal Mechanical Type
    Bearings Shielded Ball Bearings
    Port Type 1" NPT Internal
    Weight 5 3/4 (lb) 2.61 (kg)

    BILGE PUMP W/24V MOTOR
    BILGE PUMP W/24V MOTOR Model# JA 36600-0010

    • Diaphragm Design Allows Dry Running.
    • Quiet Operation.
    • Permanently Lubricated Ball Bearings on Shaft and Connecting Rod.
    • Large Vibration Absorbing Pads.
    • Corrosion Resistant Materials Throughout for Sea Water Service.
    • Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection.

    Body Materials Plastic
    Port Type 3/4" Hose Barb
    Weight 11 (lb) 5 (kg)

    174102/SS PUMP W/90VDC MTR
    174102/SS PUMP W/90VDC MOTOR Model# JA 777-9003/90F18BCT

    • Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
    • Easy to service and maintain.
    • Inexpensive to buy and operate.
    • Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
    • Handles hard and soft solids without clogging.
    • Can pump in either direction.
    • Will not airlock.

    Body Materials Bronze
    Impeller Nitrile
    Shaft Stainless Steel
    Seal Mechanical Type
    Bearings Shielded Ball Bearings
    Port Type 1" NPT Internal
    Weight 5 3/4 (lb) 2.61 (kg)
    BILGE PUMP WITH 24V MOTOR
    BILGE PUMP WITH 24V MOTOR Model# JA 37202-0010

    • Quiet running and fully corrosion resistant.
    • Supplied with pumpgard filter.

    Body Materials Plastic
    Flow Rate
    3 USG/min. 13 L/min.
    Motor Type
    Permanent Magnet
    Port Type 3/4" (19mm) hose barb

    32V WATER SYS PUMP
    32V WATER SYSTEM PUMP Model# JA 36950-2020

    • Diaphragm Design Allows Dry Running
    • Built-in Discharge Check Valve
    • Quiet Operation
    • Built-in Hydraulic Pulsation Dampener
    • Large Vibration Absorbing Pads
    • Ports Available with Barb, Threads or Flare
    • Meets USCG Regulation 183.410
    • ISO 8846 MARINE for Ignition Protection

    Body Materials Plastic
    Port Type 1/2" or 5/8" ID Hose Barb
    Weight 11 (lb) 5 (kg)

    FLOJET KIT ACCESSORY 2000-12 PUMP Model# FJ 20132-006
    List Price: $15.99
    Our Price: $10.99
    You save $5.00!
    FLOJET KIT ACCESSORY 2000-12 PUMP Model# FJ 20132-006
    FLOJET KIT PUMP HOUSING POLY PRO Model# FJ 20500-507
    List Price: $25.01
    Our Price: $17.86
    You save $7.15!
    FLOJET KIT PUMP HOUSING POLY PRO Model# FJ 20500-507
    FLOJET KIT PUMP HOUSING NYLON Model# FJ 20500-508
    List Price: $34.91
    Our Price: $24.94
    You save $9.97!
    FLOJET KIT PUMP HOUSING NYLON Model# FJ 20500-508
    FLOJET PUMP HEAD VITON W/SWITCH Model# FJ 20908-000A
    List Price: $64.09
    Our Price: $45.78
    You save $18.31!
    FLOJET PUMP HEAD VITON W/SWITCH Model# FJ 20908-000A
    FLOJET PUMP HEAD EPDM W/SWITCH Model# FJ 20908-001A
    List Price: $64.09
    Our Price: $45.78
    You save $18.31!
    FLOJET PUMP HEAD EPDM W/SWITCH Model# FJ 20908-001A
    FLOJET PUMP GEAR 115V .5/25 BUNA Model# FJ 06000-500A
    List Price: $64.26
    Our Price: $45.90
    You save $18.36!
    FLOJET PUMP GEAR 115V .5/25 BUNA Model# FJ 06000-500A


    FLOJET PUMP OSC 115V HP VITON Model# FJ ET508-224A
    List Price: $72.19
    Our Price: $51.56
    You save $20.63!

    (1)
    FLOJET PUMP OSC 115V HP VITON Model# FJ ET508-224A

    Flojet ET508 Oscillating Pump
    Designed for general consumer, commercial and industrial applications. All models are self-priming, double insulated and built to draw low amps for cool operation.
    FLOJET PUMP OSC 230V HP VITON Model# FJ ET508-244A
    List Price: $75.86
    Our Price: $54.19
    You save $21.67!
    FLOJET PUMP OSC 230V HP VITON Model# FJ ET508-244A

    Designed for general consumer, commercial and industrial applications. All models are self-priming, double insulated and built to draw low amps for cool operation.
    FLOJET PUMP OSC 115V HP EPDM Model# FJ ET508-221A W/FEET
    List Price: $83.09
    Our Price: $59.35
    You save $23.74!
    FLOJET PUMP OSC 115V HP EPDM Model# FJ ET508-221A W/FEET

    *OBSOLETE - PLEASE SUB WITH FJ ET508-224A


    Flojet ET508 Oscillating Pump
    Designed for general consumer, commercial and industrial applications. All models are self-priming, double insulated and built to draw low amps for cool operation.

    FLOJET PUMP HEAD FOR 2100-012 Model# FJ 21050-012
    List Price: $83.63
    Our Price: $59.74
    You save $23.89!
    FLOJET PUMP HEAD FOR 2100-012 Model# FJ 21050-012
    FLOJET PUMP 12V 1.0/35 PSE N/SW Model# FJ LF122-002
    List Price: $97.60
    Our Price: $69.71
    You save $27.89!
    FLOJET PUMP 12V 1.0/35 PSE N/SW Model# FJ LF122-002

    FLOJET Industrial LF Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals. The LF series of diaphragm pumps are self-priming and can be run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. The higher the duty cycle the shorter the expected life of the pump.
    Typical pump uses are liquid transfer, spraying, circulation, filtration and dispensing.


    • Duplex Diaphragm Design
    • Compact automatic demand pump.
    • Self-priming so pump can be located above supply tank.
    • Can run dry for extended periods of time without damage.
    • Built-in thermal protector,
    • Low amp draw for battery powered applications.
    • Soft compliant Santoprene mounting system.
    FLOJET PUMP 12V 1.0/35 PSI PSE Model# FJ LF122-202
    List Price: $100.87
    Our Price: $72.05
    You save $28.82!
    FLOJET PUMP 12V 1.0/35 PSI PSE Model# FJ LF122-202

    FLOJET Industrial LF Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals. The LF series of diaphragm pumps are self-priming and can be run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. The higher the duty cycle the shorter the expected life of the pump.
    Typical pump uses are liquid transfer, spraying, circulation, filtration and dispensing.


    • Duplex Diaphragm Design
    • Compact automatic demand pump.
    • Sealed pressure switch automaticatly starts and stops pump when discharge valve is opened and closed.
    • Self-priming so pump can be located above supply tank.
    • Can run dry for extended periods of time without damage.
    • Built-in thermal protector,
    • Low amp draw for battery powered applications.
    • Soft compliant Santoprene mounting system.
    FLOJET PUMP 12V S/V SW35 Model# FJ LFP122-201
    List Price: $104.41
    Our Price: $74.58
    You save $29.83!
    FLOJET PUMP 12V S/V SW35 Model# FJ LFP122-201

    FLOJET Industrial LF Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals. The LF series of diaphragm pumps are self-priming and can be run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. The higher the duty cycle the shorter the expected life of the pump.
    Typical pump uses are liquid transfer, spraying, circulation, filtration and dispensing.


    • Duplex Diaphragm Design
    • Compact automatic demand pump.
    • Sealed pressure switch automaticatly starts and stops pump when discharge valve is opened and closed.
    • Self-priming so pump can be located above supply tank.
    • Can run dry for extended periods of time without damage.
    • Built-in thermal protector,
    • Low amp draw for battery powered applications.
    • Soft compliant Santoprene mounting system.

    FLOJET PUMP 12V 1.1/35 PSV SW Model# FJ LF112-201
    List Price: $126.32
    Our Price: $90.23
    You save $36.09!
    FLOJET PUMP 12V 1.1/35 PSV SW Model# FJ LF112-201

    FLOJET Industrial LF Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals. The LF series of diaphragm pumps are self-priming and can be run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. The higher the duty cycle the shorter the expected life of the pump.
    Typical pump uses are liquid transfer, spraying, circulation, filtration and dispensing.


    • Duplex Diaphragm Pump with Fin Cooled Motor
    • Compact pump design.
    • Sealed pressure switch automatically starts and stops pump when discharge valve is opened and closed.
    • Self-priming and can operate dry without damage.
    • Sealed motor or with protective metal cooling finned cover.
    • Integral 5 amp in-line fuse with cover.
    FLOJET PUMP 12V ON-DEMAND 40PSI Model# FJ LF112421F
    List Price: $126.32
    Our Price: $90.23
    You save $36.09!
    FLOJET PUMP 12V ON-DEMAND 40PSI Model# FJ LF112421F

    FLOJET Industrial LF Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals. The LF series of diaphragm pumps are self-priming and can be run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. The higher the duty cycle the shorter the expected life of the pump.
    Typical pump uses are liquid transfer, spraying, circulation, filtration and dispensing.


    • Duplex Diaphragm Pump with Fin Cooled Motor
    • Compact pump design.
    • Sealed pressure switch automatically starts and stops pump when discharge valve is opened and closed.
    • Self-priming and can operate dry without damage.
    • Sealed motor or with protective metal cooling finned cover.
    • Integral 5 amp in-line fuse with cover.
    FLOJET PUMP HEAD Model# FJ 21050-610
    List Price: $129.41
    Our Price: $92.44
    You save $36.97!
    FLOJET PUMP HEAD Model# FJ 21050-610
    FLOJET PUMP HEAD BUNA 2C D/LF Model# FJ 21050-735
    List Price: $129.41
    Our Price: $92.44
    You save $36.97!
    FLOJET PUMP HEAD BUNA 2C D/LF Model# FJ 21050-735
    FLOJET PUMP HEAD ASSEMBLY Model# FJ 21094-561
    List Price: $135.33
    Our Price: $96.66
    You save $38.67!
    FLOJET PUMP HEAD ASSEMBLY Model# FJ 21094-561
    FLOJET PUMP HEAD STO 5C SW60 Model# FJ 21050-035A
    List Price: $144.52
    Our Price: $103.23
    You save $41.29!
    FLOJET PUMP HEAD STO 5C SW60 Model# FJ 21050-035A
    FLOJET PUMP HEAD Model# FJ 21050-030
    List Price: $145.99
    Our Price: $104.28
    You save $41.71!
    FLOJET PUMP HEAD Model# FJ 21050-030
    FLOJET PUMP HEAD FOR FJ 2100-032 Model# FJ 21050-032
    List Price: $145.99
    Our Price: $104.28
    You save $41.71!
    FLOJET PUMP HEAD FOR FJ 2100-032 Model# FJ 21050-032
    FLOJET PUMP AIR 1.9/75 SANTOPREN Model# FJ N5100040A
    List Price: $150.31
    Our Price: $107.36
    You save $42.95!
    FLOJET PUMP AIR 1.9/75 SANTOPREN Model# FJ N5100040A

    Features: N5100 Industrial Air Driven Pump
    FLOJET Industrial N5100 Series Pumps are designed for light general commercial and industrial applications. These pumps are constructed from a selection of materials for handling a broad range of chemicals.
    Model No.: N5100 Series
    • Compact design with plug-in hose connections for quick installation
    • Variety of elastomers to ensure chemical compatibility
    • Variable capacity from zero to the maximum flow
    • No pressure relief or bypass plumbing required
    • Excellent self-priming. Pump may be located above the liquid level
    FLOJET PUMP HEAD ASSY Model# FJ 20406-005
    List Price: $155.49
    Our Price: $111.06
    You save $44.43!
    FLOJET PUMP HEAD ASSY Model# FJ 20406-005
    FLOJET PUMP HEAD ASSY FOR 4105-501 Model# FJ 20406-013
    List Price: $155.49
    Our Price: $111.06
    You save $44.43!
    FLOJET PUMP HEAD ASSY FOR 4105-501 Model# FJ 20406-013
    FLOJET PUMP Model# FJ A304050610
    List Price: $159.23
    Our Price: $113.74
    You save $45.49!
    PUMP Model# FJ A304050610

    Flojet A SERIES is a self-priming pump. It maybe located several feet from the tank, above or below the liquid level (it is not a submersible pump.) For vertical pump mounting be sure that the motor is located on top, This will prevent water from entering the motor chamber in event of a leak. Pump head may be rotated in 90° increments to simplify plumbing.
    FLOJET PUMP 12V 1.6/60 PSS SW Model# FJ D3131H5011A
    List Price: $166.48
    Our Price: $118.91
    You save $47.57!
    PUMP 12V 1.6/60 PSS SW Model# FJ D3131H5011A

    Flojet 1.6 GPM 12VDC 60 PSI # 3131H5011A, self priming diaphragm demand water pump (MPU-12V-S/S-2C-SW60). Constructed with polyprolene housing, santoprene check valves & diaphragm to handle a broad range of agricultural and chemicals products plus many other applications. Replacement for Flojet #2100-132.
    FLOJET PUMP 12V 2.3/50 NO SW/NO BP Model# FJ D3144H1311A
    List Price: $171.31
    Our Price: $122.36
    You save $48.95!
    FLOJET PUMP 12V 2.3/50 NO SW/NO BP Model# FJ D3144H1311A

    Self-priming diaphragm pump with DC electric motor.
    Model No.: Duplex II DC Bypass Series
    • Handles Water-like and Views Liquids Up to 250 cP
    • Chemical-resistant polypropylene pump head for long life
    • Latest technology internal check-valves for reliable self-priming
    • Internal bypass for excellent performance range
    PUMP 12V 2.3/50 NO SW/NO BP Model# FJ D3144H1311A
    List Price: $171.31
    Our Price: $122.36
    You save $48.95!
    PUMP 12V 2.3/50 NO SW/NO BP Model# FJ D3144H1311A

    Self-priming diaphragm pump with DC electric motor.
    Model No.: Duplex II DC Bypass Series
    • Handles Water-like and Views Liquids Up to 250 cP
    • Chemical-resistant polypropylene pump head for long life
    • Latest technology internal check-valves for reliable self-priming
    • Internal bypass for excellent performance range
    FLOJET PUMP 115V 60PSI 2.1GPM Model# FJ D3631B5011A
    List Price: $175.32
    Our Price: $125.23
    You save $50.09!
    PUMP 115V 60PSI 2.1GPM Model# FJ D3631B5011A

    • Self priming up to 8 feet (2.4 m).
    • Can run dry without damage.
    • Chemical resistant material.
    • Internal bypass standard.
    • Built-in back flow preventer.
    • Heavy duty ball bearing drive system.
    FLOJET 12V 2BP PBV PUMP Model# FJ D21X003
    List Price: $181.46
    Our Price: $129.61
    You save $51.85!
    12V 2BP PBV PUMP Model# FJ D21X003

    Self-priming diaphragm pump with DC electric motor.
    Model No.: Duplex II DC Bypass Series
    • Handles Water-like and Views Liquids Up to 250 cP
    • Chemical-resistant polypropylene pump head for long life
    • Latest techhnology internal check-valves for reliable self-priming
    • Internal bypass for excellent performance range
    FLOJET QUAD RV PUMP Model# FJ 04306-500A
    List Price: $184.77
    Our Price: $131.98
    You save $52.79!
    QUAD RV PUMP Model# FJ 04306-500A

    • Intermittent duty
    • Self-primes up to 2.4m vertical lift
    • Four-piston design delivers higher flow rates
    • Quick-connect plug-in ports for easy installation
    • Pressure-switch control to run the pump only as needed
    FLOJET DIAPHRAGM PUMP 12V 1.6GPM Model# FJ D2131I5011A
    List Price: $185.50
    Our Price: $132.50
    You save $53.00!
    DIAPHRAGM PUMP 12V 1.6GPM Model# FJ D2131I5011A

    Self-priming diaphragm pump with AC electric motor.
    Model No.: Duplex II AC Bypass Series
    • Handles Water-like and Views Liquids Up to 250 cP
    • Chemical-resistant polypropylene pump head for long life
    • Latest techhnology internal check-valves for reliable self-priming
    • Internal bypass for excellent performance range
    FLOJET PUMP AOD SANTO W/O PORTS Model# FJ G57-5005A
    List Price: $193.69
    Our Price: $138.35
    You save $55.34!
    PUMP AOD SANTO W/O PORTS Model# FJ G57-5005A

    • Capable of Air or CO2 drive pressures up to 100PSI (6.9bar)
    • Robust Design with durable integral mounting
    • Patented Shuttle Valve, eliminates stalling
    • Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves
    • Corrosion Resistant materials capable of handling a wide range of chemicals
    • Sanitary design with insert molded diaphragm (Santroprene only)
    • Leak Resistant radial seals, no critical o-ring sealsQuiet Operation with large exhaust muffler
    • Ease of Installation with all quick disconnect ports
    FLOJET PUMP HEAD ASSY FOR 4305-500 Model# FJ 20406-007
    List Price: $194.34
    Our Price: $138.81
    You save $55.53!
    FLOJET PUMP HEAD ASSY FOR 4305-500 Model# FJ 20406-007
    FLOJET PUMP HEAD ASSY FOR 4405-143 Model# FJ 20406-003
    List Price: $194.65
    Our Price: $139.04
    You save $55.61!
    FLOJET PUMP HEAD ASSY FOR 4405-143 Model# FJ 20406-003
    FLOJET PUMP 12V 2.0/50 NBB NSW Model# FJ D31X015F
    List Price: $194.76
    Our Price: $139.11
    You save $55.65!
    PUMP 12V 2.0/50 NBB NSW Model# FJ D31X015F

    • Diaphragm Pump Duplex II 12V
    • 3/8”FNPT Ports, 2.0GPM
    • Bypass 50psi
    • Nylon
    • Buna Valves
    • Buna Diaphragm
    • Metal Base
    FLOJET PUMP 12V 3.3/15 PSS N/SW Model# FJ 04105-143
    List Price: $195.46
    Our Price: $139.61
    You save $55.85!
    PUMP 12V 3.3/15 PSS N/SW Model# FJ 04105-143

    • self-primes up to 10ft (3m) vertical lift
    • Runs dry without damage to the pump
    • Quick-connect plug-in ports for easy installation
    • Oil resistant elastomers - suitable for diesel transfer
    FLOJET PUMP 12V 3.3/35 PSE SW Model# FJ 04305-500
    List Price: $196.35
    Our Price: $140.25
    You save $56.10!
    PUMP 12V 3.3/35 PSE SW Model# FJ 04305-500

    • Self-primes up to 2.4m vertical lift
    • Quick-connect plug-in ports for easy installation
    • Optional pressure nozzle control to run the pump only as needed
    FLOJET PUMP 12V 3.3/35 PSE SW Model# FJ 04405-143
    List Price: $196.35
    Our Price: $140.25
    You save $56.10!
    PUMP 12V 3.3/35 PSE SW Model# FJ 04405-143

    • Internal bypass
    • Self-priming up to 7.8' vertical lift
    • Runs dry without risk of damage
    • Includes plug-in ports for easy installation


    FLOJET PUMP AIR 5.5/100 SANTO 3/8 Model# FJ G57-5205
    List Price: $200.46
    Our Price: $143.19
    You save $57.27!
    PUMP AIR 5.5/100 SANTO 3/8 Model# FJ G57-5205

    • Capable of Air or CO2 drive pressures up to 100PSI (6.9bar)
    • Robust Design with durable integral mounting
    • Patented Shuttle Valve, eliminates stalling
    • Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves
    • Corrosion Resistant materials capable of handling a wide range of chemicals
    • Sanitary design with insert molded diaphragm (Santroprene only)
    • Leak Resistant radial seals, no critical o-ring sealsQuiet Operation with large exhaust muffler
    • Ease of Installation with all quick disconnect ports
       
     

    Welcome to BMP Industrial Supply

         BMP Industrial Supply is a certified, wholesale distributor & dealer of quality, name brand industrial products at the most affordable prices. Our company provides vacuum/blower motors, vacuum cleaners, air filtration, pumps, parts, and accessories for many different industries. Some top brands we carry are: Ametek Lamb Vacuum/Blower Motors, Ametek Prestolite Motors, Atlantic Blowers, March Pumps, Oberdorfer Pumps, Shurflo Pumps, and many more. We strive to maintain the lowest prices around and value all our customer relationships. All products sold by BMP are brand new and come from leading manufacturers. We specialize in Ametek Lamb vacuum/blower motors. You can trust that by purchasing from us, you are buying from a reputable source, and customer satisfaction is of the highest importance.
    Copyright © 2007-2017 BMP Industrial Supply. All Rights Reserved.