Customers & Feedback

  • "Garmin International"
    A. Landis
  • "Napa Auto Parts"
    J. Isabelle
  • "Resco Plastics, Inc."
    W. Zink
  • "National Aviation Academy"
    J. Cupery
  • "US EPA"
    C. Hankins
  • "Penn State University"
    R. Thomas
  • "City of Raleigh Fire Dept."
    C. Joyner
  • "Empire Floors CA"
    C. Misner
  • "National Air of Texas"
    C. Williams
  • "North Pressure Wash"
    J. Yos
  • "Kilroy Insulation"
    S. Johnson
  • "RSM Electron Power, Inc."
    J. Diaz
  • "Alaska Pacific Rental"
    M. Steel
  • "Springhill Medical Center"
    R. Price
  • "Speedy Concrete Cutting"
    T. Barna
  • "C&W Davis Transport"
    C. Davis
  • "Elliot Electric"
    T. Cox
  • "Wickstrom Ford"
    P. Morgan
  • "All Phase Hydraulics"
    J. Truax
  • "National Magnetics Group, Inc."
    D. Flyte
  • "Dakota Battery & Electric"
    K. Rick
  • "PawPrints Pet Salon"
    P. Falco
  • "LM Heavy Civil Construction"
    P. Frew
  • "Century Mold Company"
    R. Manners
  • "Pentair Water"
    A. Cruz
  • "Speed Wrench Inc."
    T. Decker
Secured Checkout

  Home > Oberdorfer Pumps > CC Bronze (Pump Only) >

Oberdorfer Gear Pump Model# N990S15
Oberdorfer Gear Pump Model# N990S15
 
List Price: $1,400.00
Our Price: $1,149.10
You save $250.90!


Product Code: N990S15

Description
 
Oberdorfer Gear Pump Model# N990S15

Pump housings and gears are made of top quality bronze, shafts are 303 stainless steel. Bearings are made of high performance carbon-graphite material selected for wear resistance and long service life. Gear pumps are positive displacement pumps. Each shaft revolution displaces a definite amount of liquid relatively unaffected by the backpressure in the discharge line. Shaft speed and flow are directly proportional.

FEATURES

  • Bronze Construction with Stainless Steel Shafts
  • Helical Gears For Quiet Operation
  • Easy Field Assembly to Motors
  • Self-Lubricating Carbon Bearings
  • O-Ring Seal For Max. Leak Protection
  • For Clutch Version See N990-38
  • For Air Motor Driven Version, See N990S15H-T34

DRIVE

Close-coupled pumps are mounted directly to the electric motor by means of a suitable adapter bracket. The pump drive shaft is connected to the motor shaft by a flexible coupling.

LIQUIDS & TEMPERATURES

These pumps are suitable for all liquids that are compatible with bronze. Most common liquids are water, oil, and mild chemicals in the pH-range of 4 to 11. Viscous liquids require reduced shaft speeds of 1150 RPM or lower. Consult factory. Liquids containing solids, abrasives, powders or paint pigments are definitely not recommended for gear pumps. If abrasives are unavoidable, use a very low shaft speed. The recommended liquid temperature range is 32oF to 140oF for longest pump life. If more extreme temperature conditions exist, our factory should be consulted. Freezing of water-filled pumps can cause damage and must be avoided. Oils at low temperatures are very viscous requiring a lower speed or extra power.

SUCTION LIFT

As a general rule, the suction lift should be kept at an absolute minimum by placing the pump as close to the liquid source as possible. A gear pump in new condition can lift 20 feet of water in the suction line. A foot valve (preferably with built-in strainer) is recommended at the beginning of the suction line. For a first start-up, the pump should be primed to avoid dry running. Minimum size of the suction pipe is the size of the pump inlet port. For longer suction lines (over 3 feet), or for viscous liquids, the pipe size should be at least one size or two sizes larger than the pump inlet port.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Oberdorfer Pumps > CC Bronze (Pump Only)


Kenmore Cord Power Nozzle C50XCRG0R030 $19.22
400-14073 Alternator, 12V, 130A, Ford 3G, New $126.41
HDP-24-11 HD Power Solutions 12V 190A GM Alternator $1,464.93
New 2014 / 2016 Submersible Pump AMT Model# 5981-95 $576.00
Ametek 119413-00 Blower/Vacuum Motor $133.87
1/2 - 3 HP High Head Straight Centrifugal Pump AMT Model# 4901-95 $742.08
400-14137 Alternator, 12V, 95A, Ford 3G, New $122.25
Ametek 116136-00 Blower / Vacuum Motor 4M883 $217.23 - Qualifies for QTY Discounts
Oberdorfer Centrifugal Pump Model# 820BS11Y63 $1,573.53